Latest threads in Chevrolet 4x4 Trucksshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Dee Zee stainless toolbox has rusting steel rivets
Anyone else have this problem? To their credit, they are willing to send me new stainless rivets, for me to drill out and replace in my new 800 dollar chinese made truck bed toolbox.
2
|
17 years ago
|
2 | |
|
|
99 k1500 silverado
hi iv'e got a 99 k1500 silverado new body style with the 5,3lit vortec engine. my problem is i turn the ignition key on, and everything is fine. lights come on every gauge reacts and iv'e got plenty...
6
|
17 years ago
|
6 | |
|
|
s-10 plow
I was looking into putting a snowplow on a 1999 zr2 ext cab Boss plow rep said they won`t put a plow on 99 on up s10 because of ball joint failure on the light frontends s10`s have. any coments or...
8
|
17 years ago
|
8 | |
|
|
'93 Jimmy 4x4,4.3,W : Loud High Pitch noise
So, my Jimmy started to make a loud High pitch noise. This noise is really loud, it is hard to pinpoint location, but it seemed to be comming from the passenger side of the engine. I thought it was a...
2
|
17 years ago
|
2 | |
|
|
92 Yukon: Fuel Pump filter?? How to remove??
I'm replacing the rusted out fuel tank and sender/fuel pump mount unit on my Yukon. The fuel pumps works OK and I plan to reuse it, as I do my own work. The fuel pump has a long black fuel filter at...
3
|
17 years ago
|
3 | |
|
|
Chevy/GMC Part Numbers
At the dealer, they have a computer system and they look-up parts, have a picture, and get the P/N. Is there any commerical program CD/DVD available for the average Joe that would have this same info?...
—
|
17 years ago
|
— | |
|
|
Recommend web site gmc/chevy truck repair.
Can anybody recommend some good reference web sites for gmc/chevy truck repair. I've googled and all I get are links to other search sites. What happened to the web? Use to be easy to find informative...
4
|
17 years ago
|
4 | |
|
|
info please, steering damper?
I have a 88 chev 1500 4*4, with 4 inch body lift, 350ci,, anyway,, I have excessive front, wheel wobble,, ocassionally, but getting more often, 35's don't help,,, but my question is,, this truck does...
1
|
17 years ago
|
1 | |
|
|
Pillar gauge pods for 87-earlier trucks??? Anyone?
Hi... I posted about this before, but got no replies. Surely, someone has to make this product. Why wouldn't they? As common as 73-91 Blazers and Suburbans are, and 73-87 pickups, you'd think surely...
5
|
17 years ago
|
5 | |
|
|
93 Safari 4x4 with intermittent EGR failures
Need help with 4.3L HO "W" engine problems. This puppy has 224K miles and began to throw EGR codes whenever the idle was rough, or sometimes at highway speeds. I've done this so far: Replaced air...
—
|
17 years ago
|
— | |
|
|
Door hinge spring replacement
Can anyone tell me a safe way to replace the spring in the door hinge on my 2000 K2500 truck. I noticed one day that the spring was missing so I picked up a replacement with the intention of...
2
|
17 years ago
|
2 | |
|
|
Temp sender...
Since I pulled all the wiring out to replace it, I can't remember where the temperature sensor is. I thought it was the one on top of the intake manifold, behind the upper radiator hose neck, but when...
10
|
17 years ago
|
10 | |
|
|
2000 BLAZER 4 X 4 problem ???
I just had the rear seal in the transfer case replaced as it was starting to leak. Now I can't switch into 4x4 high or auto 4x4, the light on the push button countinues to blink in any mode except 2...
2
|
17 years ago
|
2 | |
|
|
90 lumina apv no fuel from injectors
90 lumina apv 3.1 liter has tbi injector assembly. Car ran rough so the fuel pump was replaced. Car still ran rough so the whole distrbutor and gear assembly was replaced. After that car did not...
3
|
17 years ago
|
3 | |
|
|
C10 Question
I'm doing a lot of off roading. Traded in my 1996 jeep last week for an 85 C10, shortbox on 40's. (pics: reason why it shouldn't go through inspection with those tires ?
7
|
17 years ago
|
7 |