Latest threads in Chevrolet 4x4 Trucksshow only best voted threads

Subject Author Posted Replies
 
brake switch not the problem...88 chev truck
Good day. I have come to the conclusion that the brake switch is not the problem. I say this because we have tried different ones. The strangest thisng is that when I disconnect the brake switch from...
5
5
 
95 Silverado 4x4
My son recently bought a 95 Silverado and although it's a cherry truck, we can't seem to get the cruise to work. Where should I be looking to find out what the problem is ? Is this a common problem...
 
locating brake switch in 88 chev
After reading about people with much the same problem, I was wondering if someone could tell me where to find the "brake switch" in this truck. Sounds as if it is the culprit. Thanks in advance.
1
1
 
88 chev truck
brake lights stuck on. even when truck is shut off. where would the problem be found? could it be even because of a burnt bulb - i don't think so, but who knows. any help PLEASE.
2
2
 
Help!
I am having problems with my 86 Chevy Silverado 2wd pk-up. The problem is that the starter won't crank. When I turn on the key, I can hear clicking noise, but when I try to start it there is nothing....
2
2
 
2000 silverado window regulator
The cable broke on the drivers side window. Can someone direct me to step-by-step procedure for the repair. Are the cheap ($40) regulators a waste? Can I just replace the cable? Suggestions, help or...
1
1
 
FS: CompCam for an LS1,2,6 motor. With Pushrods and Springs.
Comp Cams # 54-000-11 / G5X-2 Hyd. Roller Cam for LS1/2 1997-up. 232/240 dur. @.050" . .595/.608 " lift. on a 114 LSA. Comes complete with exact matching Comp Cam. Sring Set # 26918-16 and exact...
 
98 Blazer-How to remove transfer case motor
I have a 98 Blazer that is having some problems. I have been told that the problem is probably the transfer case motor. Can anyone tell me how to remove it and how difficult it is to remove it? DRW
 
89 1ton 4x4 front rotors
Ok was planning on doing front brakes on my 89 GMC 1ton 4x4 today. So the other day I read up in my factory service manual, looks like an easy job, so I get all the parts, and today I get to work....
3
3
 
91 chevy
This truck still will not start. It now has a new pickup coil, control modual, coil, cap & rotor, computer, ignition switch. I have been through a haynes manual with a multimeter and can't find a...
1
1
 
Do I need hub centric or lug centric wheels?
Ordering some new wheels tomorrow. They offer a hub centric version and also a lug centric version. Do I need to order hub centric wheels for my truck? It is a 1996 GMC Sierra 1500 Z71 that came with...
2
2
 
7" Pro Comp kit
I have a 99 silverado 1500 2wd and I was looking at the 7" pro comp crossmember system, has anyone used this kit or lifted their silverado and had any problems with it.
 
key fob programing
2005 Chev Colorado Does anyone know how to program extra key fob have original 2 bought a new one from ebay need help Thanking you in advance
 
305 wont start
i have 1984 c10 with 305, replaced timing chain new valve cover gaskets new timing cover now truck wont start, timing marks matched up distributor placed in with motor at tdc with dist pointing toward...
5
5
 
Broken Coolant fitting in Dome
94 GMC 350 with a broken fitting that threads into the dome at the rear,, not coming out at all any hints??