How Do I Program A Key Fob For A 2006 Chevy Silverado??
- posted
16 years ago
How Do I Program A Key Fob For A 2006 Chevy Silverado??
See Below;
Close all the vehicle doors.
Insert the ignition key into the ignition lock cylinder. Press and hold the door unlock switch.
While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
Repeat the previous step to program up to 4 transmitters.
Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter programming mode.
Operate the transmitter functions in order to verify correct system operation.
----------------- TheSnoMan.com
Will this method work for a 99 Chev Z71?
It should.
----------------- TheSnoMan.com
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.