1. Home
  2. Chevrolet Trucks
  3. 1999 Blazer Keyless entry Problem

1999 Blazer Keyless entry Problem

OK, I have found this way on the internet as to how to reprogram that key fobs,

  1. Start with the ignition OFF, hold down the power unlock button on the door panel. Turn the ignition key ON, OFF, ON, OFF. Release the power unlock button on the door panel. The locks will cycle once.

  1. Hold down the key fob lock and unlock buttons for 15 seconds. The locks will again cycle once.

  2. Repeat step 2 for each additional key fob.

  1. Turn the ignition on to exit the key fob programming mode. Programming is now complete.

And i have tried it numerous times without it working are there any other ways?

Reply to
catphe10
Loading thread data ...

Looks correct.

1- Start with ignition off ALL doors closed. Hold down the unlock button on drivers door. Turn ignition ON - OFF - ON - OFF. Release door button. Locks will cycle Lock/Unlock 2- Hold down the Lock and Unlock on the remote for 15 seconds, or until the locks cycle again.

Repeat step 2 for each remote.

Turn ignition on to exit.

Check all remote functions.

At which point are you having problems?

Reply to
Steve W.

I'd be tempted to look in the owners manual.

Reply to
Stormin Mormon

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.