IAT Sensor???

I have a 1994 GMC K1500 4WD with a 350 and TBI. I was trying to locate the IAT sensor on this motor to attempt a resistor mod to see how it would affect performance. However, from what I've read in the repair manuals and seen in the schematics, I don't think this year/model uses an IAT or MAT sensor. Additionally, the "books" say it was on '96 and later model GMC's. Can you, the experts, confirm this info? Please email me direct and snipped-for-privacy@yahoo.com. Any assistance is greatly appreciated. Thanks. Andy

Reply to
AndyW
Loading thread data ...

No IAT or MAT on the TBI trucks. 96' and later were MPFI MAF based systems and do have an IAT located just aft of the airbox.

Doc

Reply to
"Doc"

Thanks Doc. Appreciate the quick turn on the question. Andy

Reply to
AndyW

Another question.....is there anything that one can do on the aforementioned engine /vehicle to improve the performance without spending alot of $$? I was considering headers, cold air intake system, and/or a performance chip like the Hypertech chip. Any thoughts or advice from the groups as well as actual mods that have been done on your vehicle would be appreciated. Thanks. Andy

locate the IAT sensor on this motor to attempt a resistor mod to see how it would

manuals and seen in the schematics, I don't think this year/model uses an IAT or MAT

snipped-for-privacy@yahoo.com.

systems and do have an IAT located just aft of the airbox.

Reply to
AndyW

aforementioned

Here are my suggestions based on experience, take them for what they're worth!

  1. Headers (FULL LENGTH, not shorties) will give you the biggest bang for your buck. Tri-Y's work best on stock truck motors.
  2. Cold air intake systems are a waste of money. In fact, your truck already has one..........see that tube running from the air cleaner to the fender? There is a baffle/silencer in there that restricts airflow that can be removed for a few extra horsies.
  3. Performance chips are a waste of money on a bone-stock engine.

  1. High performance plugs would do er' some good. I suggest AC Delco Rapidfires.

  2. RESTORE lubricant in the oil. Some say it's snake oil, I've used it religiously for years and it's NEVER failed to produce a measureable increase in compression, thus resulting in more power. Add with every oil change.

My $0.02

Doc

Reply to
"Doc"

That's why he's the Doc:

And we're not!

Where the hell have you been hiding for the past few days Doc?

Refinish King

Reply to
Refinish King

I was out of town for a week or so and didn't have internet in my room. Didn't feel like walking down to the "business center" in the hotel in my skivvies every night to check in on you crazies!

Doc

Reply to
"Doc"

Maybe some babe would have liked it?

Then we would have read about you on the news!

Doc, gets decocked, by Mrs. Doc!

Welcome back!

Refinish King

Reply to
Refinish King

Thanks bud!

Doc

Reply to
"Doc"

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.