S10 Blazer park brake is stuck down

89 S10 Blazer 4.3 4x4

Applied park brake this afternoon and now it will not release. Right now it's all the way in and it will not release. Have not ever worked on brakes, any suggestions? Thanks in advance

Reply to
Bob
Loading thread data ...

Either the front cable or the two rears (or all three) are likely seized up. Hold the release and pull the pedal up, then climb under the truck (Assuming it's properly chocked of course) with a can of penetrating oil and pull on the cables to try and find one that won't budge. Worst case scenario is pulling both drums (They're gonna fight ya) and snipping the parking brake cables inside the drums. That would get you moving at least.

Another possibility is that the under-dash mechanism has locked up. Unlikely but possible.

Reply to
SBlackfoot

Got her free, it was the underdash mechanism. thanks all!!

Reply to
Bob

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.