hi guys,
i'm tring to solve an oil pressure problem. My scale shows no oil presssure or just 1/3 at the begiining and drop to 1/5 of the scale. I remeber that it is usually 2/3 when cold and goes to 1/3 when hot.
What i did so far is, i put a new oil pressure sensor and i cleaned the oil suction hose in the pan. I found some paper like pieces. I clean, and it starts to show 1/3 more often but did not help alot. I check the valves if they get proper oil and they all show they are getting some and in my idea enough to say everything works fine.
Any experience on this subject are welcome.