help with some information

Hi everyone i am need of some help i have a 95 avenger es 2.5 v6 and i am getting three codes from the pcm. i cant figure out what is going on here the codes are 22 23 and 44 and 44 is the one i can get right i dont understand what this text below means.. could some one translate it into simple tearms doesd it mean i need a air temp sensor?? this is for code 44.............

The power module has an air-cooled resistor which is used to sense the incoming air temperature. This information is fed to the logic module and is used to control the duty cycle of the field current in the alternator. This code applies ONLY to alternators whose voltage is computer regulated. The battery voltage is sensed by the logic module

-- there is an internal takeoff from the wire feeding the NVRAM keep-alive power circuit which is fed to a voltage comparator. So...if

you lose the feed to keep RAM information stored when the engine's off,

you also lose battery voltage sensing.

thanx to all that can help joe

Reply to
jo jo avenger boy
Loading thread data ...

I believe all those faults are related to voltage high or out of range, since they all share the same ground I would start tracing the black/wire from the sensors back to the PCM and you will probably find your problem. Don't just start tossing parts at it because it wont fix it.

Glenn Beasley Chrysler Tech

Reply to
maxpower

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.