On 10 Nov 2006 19:53:24 -0800, firstname.lastname@example.org wrote:
If that's the case then you don't have something right. You could
have the distributor 180º out or the dist. is firing before the intake
valves are closed, or the rockers are down too deep keeping the intake
valves open, or the cam was installed wrong, or who knows what else is
happening. Start from the beginning again making sure that the cam
and crank are correctly set up. You probably just have it firing much
too advanced but it's better to be safe than sorry.
Motorsforum.com is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here.
All logos and trade names are the property of their respective owners.