Muncie Transmission Rebuilding

Hello...I offer a rebuild service on Muncie Transmissions and also do general machine work and welding. I re-sleeve and bore the countershaft openings back to 7/8" or open them up to 1" for a bigger countershafts.
I also bore and tap 1/2-14NPT for the lower drain plug.
I can also flycut both sides of your case to make them parallel again if they are warped or galled badly. Helicoil service is also available on any non-repairable stripped threads. All threads in the cases are chased and cleaned and the case is soap and water washed and bagged before shipment back to you.
I also specialize in repairing aluminum and cast iron castings. All castings are degreased and then pre-heated prior to welding. All welding is done on a Miller Syncrowave 250DX with the appropriate filler metal for the base metal. Quick and dirty repair jobs can be done with a Miller Spoolmatic 30A spoolgun on aluminum. Some cast iron jobs will have to be brazed due to the need for flux because of the oily base metal.
Please e-mail me at if you are interested with a contact number and I will get in touch with you via phone or via e-mail whichever you prefer. My rates are reasonable and are 100% guranteed.
Thanks, Steve

Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
Add image file
Upload is a website by car enthusiasts for car enthusiasts. It is not affiliated with any of the car or spare part manufacturers or car dealers discussed here. All logos and trade names are the property of their respective owners.