Have a question or want to start a discussion? Post it! No Registration Necessary.
Now with pictures!
- armymunsey
August 8, 2005, 1:41 am
i have a 97 ford windstar. 3.8 v6. i just removed the transmission to
replace the torque convertor seal and the speed sensor. i also changed
the plugs, wires, and oil. now that i have it put back together the
van won’t
start. i checked the fuel pump shut off switch and it is good. i also
checked to see if i have power to the switch and i don’t. i also
turned the key on and checked to see if i have power at pin 13 on the
ccrm plug and i do. does that mean that the ccrm is bad.
--
Posted using the http://www.autoforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL:
http://www.autoforumz.com/Ford-Mecury-97-windstar-fuel-pump-problems-ftopict132497.html
Visit Topic URL to contact author (reg. req'd). Report abuse:
http://www.autoforumz.com/eform.php?p=644583
Site Timeline
- » Spec's of Capri rs mk1 in race3trim ?
- — Next thread in » General Ford Forum
-

- » 2000 cougar stick shift
- — Previous thread in » General Ford Forum
-

- » 2001 ford station wagon AC problem
- — Newest thread in » General Ford Forum
-

- » 97 Ford Ranger - Heat & AC Blower Fan stopped working?
- — Last Updated thread in » General Ford Forum
-

- » Megane 2 04 2L Auto
- — The site's Newest Thread. Posted in » Car Maintenance
-


