NEED HELP BRONCO FLOODING!!!

my 1986 ford bronco 2 is flooding bad there is oil and gas coming out the exauhst but it starts and runs does anyone know what i can do??????

Reply to
derek420
Loading thread data ...

lots of black smoke? Check the vacuum to the MAP sensor. Then unplug it (electrical wires) and see how it runs. If it runs better then replace the sensor.

Reply to
Shoe Salesman

Have it towed to a repair facility before you get gas in oil and ruin your engine.

Jeff

Reply to
Jeff

no black smoke ideals normal just oil and gas pours out the exhaust

Reply to
derek420

If the truck is running and the exhaust hasnt blown into pieces, gas pouring out the exhaust reads: lots of black smoke. Oil pouring out the exhaust reads: lots of grey smoke. If you actually have liquid oil and gas pouring out of your exhaust pipe you need a new engine for sure. Im not sure that you are discribing what it is doing correctly. Maybe you have water or coolant comming out? (not really POURING out?

Reply to
Shoe Salesman

"derek420" wrote in part:

Doesn't seem possible. Maybe you are seeing water and carbon... Does it stop after the engine heats up? Can you smell the gasoline?

-- Jim Chinnis Warrenton, Virginia, USA

Reply to
Jim Chinnis

yes it is possable and i found out that it is just the fuel pressure regulator doing this

Reply to
derek420

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.