Power Windows stuck

The rear door pw's on my '99 Taurus are stuck in the up position. Niether the individual door controls or the divers master window controls work. The question is, how does the drivers inner door panel come off after the screws are removed?

Eric

Reply to
Eric Toline
Loading thread data ...

  1. Disconnect the battery ground cable. For additional information, refer to «Section 414-01».
  2. Remove the front door trim panel screws.
  3. Remove the front door trim panel.

Note: The front door trim panel has five two-part pin-type retainers. Then male part of the trim retainer will remain with the trim panel and the female part will remain with the door.

Note: To release the door trim panel pin-type retainers, first pull outward on the bottom of the door trim panel.

  1. Disconnect the electrical connectors.
Reply to
Mortimer Schnerd, RN

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.