89' F-150 -- 302 swap 351w

I have a 89' F-140 4X4 Custom with a 302 Multiport Fuel injection and

5sp, manual trans and was wondering what is involved to switch it with a 351w muli-port fuel injection! (computer swap required?) keeping 5sp manual. Also, if there is a kit available to go from front coil to front leaf? any assistance greatly appreciated!! THX
Reply to
decision_impaired
Loading thread data ...

On the front end swap, find you an axle and springs from a pre-1980 truck or Bronco, it'll bolt up, no kit needed.

You'll need the computer and front accessory components and brackets to do the engine switch The exhaust will bolt right up, and it'll need to have the same double-sump type oil pan to work in the truck. The pans won't interchange, the rear main is larger on the 351W. You'll also need the flywheel from the 351W and clutch. It has the same bolt pattern as the 302. A 351W from the same era as your truck will be the easiest, but it won't be MPI. It's a pretty easy, and worthwhile swap.

Spdloader

Reply to
Spdloader

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.