computer in F150

F150 1992 4x4 auto trans E4OD

302 HO 1994 motor has been installed few years ago and don't know serial nu. of the car or truck of origin. need a computer and even don't know if the old is the good one you got an answer?
Reply to
blay
Loading thread data ...

If you check the ECM with a scanner it will do a self test. If you need a replacement, you will need the cvalibration code from the old ECM case or, there should be a decal on the driver door frame with the original ECM Calibration code. Sometime the cal codes are updated. A ford parts man should be able to give you any updated codes or, acceptable alternate codes. BTW, you indicate this is an HO engine. It will work "ok" but, has a different firing order from the truck 5.0L. The HO engine was never paired with the E4OD trans as you may already know. You are pretty much stuck with running it off a regular 5.0L ECM and making sure the fireing order is correct for whichever you have.

Reply to
lugnut

fire order is ok....same than 351 i will try a 351 compu.........and hope

Reply to
blay

On Tue, 11 Jan 2005 10:24:25 -0500, blay rearranged some electrons to form:

It probably won't run right.

Reply to
David M

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.