replace high beam on a 92 accord?

Info on how to do it would be appreciated.

Jim Eales

Reply to
Jim Eales
Loading thread data ...

If the same as the '93:

  1. Disconnect the 2-pin connector from the bulb. If on the right side, remove battery and coolant reservoir first. The connector appears to pull off downward, with a depress-tab latch.

  1. Turn the retaining ring CCW, then remove the bulb.

If you have to replace the entire unit, there is more.

Remember to clean the new bulb with alcohol before installing if you touch it with your fingers.

(from the Helm manual for the '93 Accord)

Mike

Reply to
Michael Pardee

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.