Window Winder

I am having trouble with rear door window and want to remove panel but cannot figure out how to remove window winder,any ideas please. Thanks Brian

Reply to
Brian Boreham
Loading thread data ...

Brian,

They are usually held on with a small "c" clip---you have to have a somewhat special tool to slip between the door panel and the winder shaft to dislodge to clip to pull it off---

Good luck--

Reply to
Ferdy

The clip is in a "C" shape, with the opening pointing toward the knob. The clip is behind the washer on the window crank.

Roll the window about halfway down with the knob of the crank pointing up.

Get a flat blade screwdriver and insert between the crank and plastic washer and twist the screwdriver while turning the crank. This will probably push into the opening of the clip and not allow it to turn, and should push it off the crank handle, allowing you to slide the crank off.

Reply to
hyundaitech

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.