1. Home
  2. Jeep and Willys (new and old)
  3. Front Alignment Specs

Front Alignment Specs

Group,

This has probably been covered before, but what front alignment specs are use on a 2000 XJ with a 3" lift? Coils with 1.5" pucks (for the added weight of a winch & bumper) are used in the front.

Thanks Group!

Debbie & Norm Parsley XJ Couple

2000 Cherokee Classic
Reply to
Norm & Debbie
Loading thread data ...

They are pretty much the same. Just make sure your toe is right so you dont eat tires. someone correct me if Im wrong because mine has been fine a long time with the factory settings. KH

Reply to
Kevin in San Diego

Thanks for the info Kevin!

Norm

Reply to
Norm & Debbie

Set your toe-in so the front of the tires are 1/8" closer to each other than they are in the rear... this works extremely well for low tire wear and good handling per the instructions at

formatting link
Your XJ's caster angle is fine with only a 3" lift and its camber angle isnot even adjustable so no worries there either. Toe-in is important though,so make sure you keep this setting up to snuff. :) Jerry

Reply to
Jerry Bransford

Reply to
twaldron

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.