Pics or Call out of Power Steering bracket assembly w/ MPI

bill-don't know if you've seen this site. this guy's pretty cool and his projects page simply rocks! good luck!

Hey thanks Serg. Yes, I have this guy's page along with another and a host of pics downloaded to my pc. I just don't have a good pic of the finished bracket assembly of the power steering pump on a serp belt. I basicly have been told just to make it work.

No prob. I'll work it out.

Thanks for the reply.

bill

I would jump in here, but I have a vbelt system, and I don't know that the brackets are the same or different.

My power steering pump gets a bracket on the front and on the back. I'll have to look at it more closely to be sure, but my recollection is that there are two brackets that sandwich the body of the pump. I actually think that only one of the brackets holds the pump on, the other is itself a bracket that held the air pump for the cold air injectors (part of the old smog system).

I'll take a second look ant my power steering and describe the brackets. I seem to remember having to put in a couple of washers, and I seem to remember there was a spacer of about an inch or inch and a half that was needed too.

same reason why i haven't sent pix either...

Thanks guys, Another thing I could do is call jeepsrus to see what they to.

Thanks again,

bill