1. Home
  2. Land Rover 4WD vehicles
  3. 300Tdi ES Air Con Compressor Clutch Relay

300Tdi ES Air Con Compressor Clutch Relay

Oracles,

The hottest day of the year so far is not the day to have an aircon fault!

System as working fine on Friday. System freshly charged with coolant, switch illuminated but no drop in engine revs when the Compressor Clutch should engage.

All belts tight, no nasty noises.

Checked volts on the compressor clutch supply line - 0V between pins when dashboard '*' switch is closed - waited a couple of minutes to see if anything changed - no change.

I suspect that the Compressor Clutch relay is the next link up the chain, unfortunately I have no idea where it is.

I have RAVE, but only for a DII, so the fuse and relay layouts are all different.

Could any of you enlighten me as to where to start looking for the Compressor Clutch relay?

Thanks in advance for any suggestions.

Best regards,

Tim

1996 Disco 300Tdi ES
Reply to
Tim
Loading thread data ...

Just had a quick google and found this - it might be a starting point.

formatting link

Reply to
Fred

On or around Tue, 2 Jun 2009 14:49:19 +0100, "Tim" enlightened us thusly:

I've got a RAVE for DI, provided it's 95-on and not an early one. I've got a paper manual for those, in a silver folder.

Reply to
Austin Shackles

On or around Tue, 2 Jun 2009 14:49:19 +0100, "Tim" enlightened us thusly:

RH footwell panel, is what RAVE says.

Reply to
Austin Shackles

formatting link

Might also be the A/C fuse. Mine is in the block behind the battery in the engine compartment, with the fusible links. 20A IMS.

Reply to
GbH

formatting link

Thanks for the input guys - good leads for me to follow up.

Tim

Reply to
Tim

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.