There have been a couple of enquiries recently about mounting the spare wheel on the bonnet of a TD5 defender.
I've just read in one of the comics that there is a kit for doing this from
Regards. Mark.(AKA, Mr.Nice.)
There have been a couple of enquiries recently about mounting the spare wheel on the bonnet of a TD5 defender.
I've just read in one of the comics that there is a kit for doing this from
Regards. Mark.(AKA, Mr.Nice.)
I've seen that too but thought it was a bit late / early for April 1st ;-)
Steve. Suffolk. remove 'knujon' to e-mail
If it were me I'd find another way. That's a shed load of money for what amounts to a bracket and some supporting plates. IMHO.
Regards. Mark.(AKA, Mr.Nice.)
Right - got the Good Book out - here's the list of parts for fitting a bonnet mounted Ring Type spare wheel mount for Defenders from 2A622424 on, i.e. Td5.......(the bar type only goes up to the end of LAxxxxxx, i.e. 200Tdi)
There's some rivets, bolts and washesr required extra - say about 20 quid max, though probably a lot less.
It *seems*, from the Good Book, that you cannot buy a bonnet for Td5's with the spare wheel mount fitted, it has to be added as a kit afterwards - thats not the same as "you can put a spare on the bonnet".
Anyway, here's the list (subject to LR's random price change generator)......
MUC2443 Def Bonnet Spare Wheel Support 1 10.72 17.50 10.72 MUC6418 Def Bonnet Spare Wheel Reinforcement RH 1 5.54 17.50 5.54 MUC6419 Def Bonnet Spare Wheel Reinforcement LH 1 5.54 17.50 5.54 MRC4619 Spare Wheel Mounting Buffer 4 1.55 17.50 6.20 AQU110010 Def Bonnet Spare Wheel Retention 2A622424 on 1 13.00 17.50 13.00 AQU110020 Def Bonnet Spare Wheel Carrier Ring 2A622424 on 1 11.00 17.50 11.00 MRC4473 Spare Wheel Mount (Bonnet) Fixing Bolt 2 2.11 17.50 4.22 BTR550 Def Bonnet Spare Wheel Cover Plate 1 12.30 17.50 12.30 ______________________________ Sub Total: £68.52 VAT Total: £11.99 Net Total: £80.51
Hope that helps!
Cheers Richard
Richard,
Do you have a listing for the Military spec bonnet for the 90? I had a look at one the other day and it appeared to have an integrated wheel mount.
P.
Nope! It may be in some supplement that I don't have.......but then, as fas as I know, the Military don't use Td5's except in "civilian" roles.
Richard
On or around Thu, 2 Dec 2004 08:49:19 +0000 (UTC), beamendsltd enlightened us thusly:
ISTR a special bonnet for the 300 TDi with a wheel well in it.
Mind, I never had problems with my 110 bonnet - bolted the rear wheel carrier onto the bonnet. The bonnet hasn't got a well shape or anything but it still worked. The only mod to the carrier was some little spacers about
1" long, so that the weight of the wheel rests on the bonnet and is held down by nuts, rather than the way it is on the rear door with 2 sets of nuts so the wheel stands off the door.
ditto for mine
Regards. Mark.(AKA, Mr.Nice.)
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.