Flywheel On P38a 1995 4.6

There is what appears as an inspection hole bottom right of the flywheel housing unit (looking from the front). Flywheel rotation can be observed when turning engine over. My question is that does this inspection hole have something like a rubber bung to protect from stones as they could easily fly up from road tyres and caues untold damage to flywheel teeth and such? Bob

Reply to
BoB-B
Loading thread data ...

You might be looking at the access hole to get to the flex-plate bolts. There should be a big bung in there. From memory it could be a 40-50mm hole (bit under 2 inches?)

Craig Qld, OZ

Reply to
CraigB

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.