Wolf air intakes

I am hunting for the left and right Wolf air intakes on the Defender or alternatively ....the part numbers.

The issue is ....supercharged 2.8i Defender is sucking a dent in the Mantec snorkel and I loose around 20 bhp. If I bring air intakes out both sides, it works very well ..... any alternative suggestions would be appreciated.

Oh, target is 170 kW on wheels .... around 230 bhp at 5700 ft above sea level.

Reply to
Aubrey
Loading thread data ...

I have a brand new right hand one, in Scotland, where are you located? Badger B.H.Engineering, Rover V8 engine specialists.

Reply to
Badger

I am addressing this problem as we speak - the mould should be finished this week in time to get some vents ready to take to Billing... I have made a wingtop mounted air vent that picks up through a grille on the front face and channels it back across the wing top into the 'heater' intake vents. Fit one on the one side to boost your heater and fit one on the other side to provide lovely cold air for your engine...

Have alook at the 'DEFENDER SPORT' page of

formatting link
- the photos of the vents are of the model and not the finished item which will be in ready to paint gel coat.

David LLAMA 4x4

Reply to
David_LLAMA 4x4

I am in South Africa but will be in UK, first week of Aug. If you can tell me where I could find a left one ...and how much you require .....

Aubrey snipped-for-privacy@mweb.co.za

Reply to
Aubrey

Will need to think about price, probably about UK£25 +p&p. Dunno where you'll get a left hand one, though. I'll look into it. Badger.

Reply to
Badger

I managed to get a replacement (left side) one from a local UK LR main dealer (now Marshall Land Rover of Lincoln, was TMS at the time).

Just went in and asked for it by name and they looked up the part number and ordered it.

They do regularly have military LR's in for work so this might have helped.

Can't remember the cost, but don't remember it being that much- even for Land Rover!!

Reply to
David Willerton

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.