1. Home
  2. Car Maintenance
  3. car wont start

car wont start

ive just read you post,

sorry to bother you but im having a same problem with my honda civic vti!!!

but my car wont start, i had to rewire my whole car as the previous owner cut it all (dont know why)

but the only wirring harness i could find was one with an immobiliser but the person i bought the wirring of said he has cut the imobiliser off.

i found the the imobiliser unit it self connected to the ignition barrel wirring.

so i didnt use that part of the wirring as i had my own ignittion wirring that was o.k wich plugs in to the main fuse box under the drivers side steering.

when i turn ignittion on normally the "RELAY ASSY, MAIN" (as stated on the relay)

makes a click noise, and then turn the key it would start fine,

but now the "RELAY ASSY, MAIN" DOSE NOT make a click noise and the car is turnning over but not starting!

ive tried the "RELAY ASSY, MAIN" from my friends car and it still dose not start so i know my relay is o.k!

but how can i chek for fault??

any info please reply.

thank you.

Reply to
pure_breeds
Loading thread data ...

If the new loom contains wiring for an immbolizer, it's likely that there will be far more differences between the looms than just a few additional wires for the immobiliser module (the bit round the ignition barrel is only one part of the system). It would of been far simpler to repair the original loom, unless it really was damaged beyond repair, even if it meant replacing every single wire one at a time. As it stands, the only option is a full wiring diagram, and checking every single wire.

Reply to
moray

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.