I recently had a leaking power steering cooler replaced on my 'S' reg Mondeo deisel which meant that the power steering oil had to be replaced. I notice that the oil level in the resevoir is virtually at the top of the cylindrical portion where the oil is poured into which is about 4 cm or so inches above the max mark. The max and min marks are only about 5 mm apart and I am concearned that something could happen with it being overfilled as it is
Any comments ?
Just take the surplus out. Overfilling doesn't affect or damage p/s systems, but fluid might get vented out into the engine bay. Messy if nothing else. Mike.
Just take the surplus out. Overfilling doesn't affect or damage p/s systems, but fluid might get vented out into the engine bay. Messy if nothing else. Mike.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.