hi,
i am trying to torque the crank pulley bolt on my 95 to 120# with tranny in gear and brakes set but cant get to hold. i do not see any access/inspection panel to be able to jam the flywheel...
any suggestions?
tia, peter
hi,
i am trying to torque the crank pulley bolt on my 95 to 120# with tranny in gear and brakes set but cant get to hold. i do not see any access/inspection panel to be able to jam the flywheel...
any suggestions?
tia, peter
that still didnt work initially, so i set the torque wrench at 90, then 100, then 110 and finally 120. i guess i didnt have enough room to get to 120 in one step.
thanks, peter
doing the belly pan and anti freeze at 6 in the morning........
You're an adventurous soul my friend! What's the weather like at 6:00am where you are? Here in Houston, it'd already be about 78f. :-(
cd
99BBBMotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.