3.73 Gear & Subframe Connectors

Hi I am new to this group :) I know these questions have been asked hundreds of times.

Question 1 I have a 94 GT I want to put Subframe Connectors on it what are the best ones?

Question 2 I am getting a 3.73 gear put in what problems will I have getting speedo to work right? and will there be any other thing I must fix?

The car is all stock except for 2 1/2" Catback Flowmaster Exhaust System

Thanks for your input Van

Reply to
vott
Loading thread data ...

You are going to get a ton of opinions on which subframes to buy, I chose the Steeda 4130 (weld in) alloy tube type connectors for my car, I am very pleased with the results.

formatting link
for the speedo gear, you can get them from the dealership. Tell them whatyou are putting in, and they can get you the right one. If you don't already have a strut tower brace, I would recommend it to go with the subframes.

Good Luck!

Kate

98 Cobra Drop Top
Reply to
SVTKate

It all depends on your transmission.

5 speed - dead on

Change the drive gear from a 8 tooth to a 7 tooth. (requires tail shaft removal, but can be done in car)

21th speedo gear

Automatic - as close as you'll get

Go with 23 tooth Jeep gear. still will be about 5% off. For the speedo thats not to bad, but if you drive a lot it will rack up some extra miles.

MadDAWG

95gt, aode, 3.73 gears
Reply to
MadDAWG

Thanks For the advice people.

Reply to
vott

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.