'94 GT throttle body & spacer questions

Are there any significant advantages to installing a 65mm or 70mm throttle body on a stock engine? Would there be additional hp & torque gains if a TB spacer was installed with the stock TB or with the larger TB's?

Reply to
Richard
Loading thread data ...

I'm not sure of the spacer, but the air is still going to abide by the "weakest link" theory.

If your intake is matched to the stock TB (57MM on the Foxes, not sure about the SN-95's), then you're going to have a larger opening stepping immediately down to the stock size intake hole. This probably won't help you with anything at all.

If the intake is in fact larger, a 65MM TB may help you, but the gains will probably be small.

IIRC, the SN-95 cars have an elbow in the intake path. This is probably more of a spacer than anything you could buy to add on to the Fox cars.

JS

Reply to
JS

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.