hello from france need a help MUSTANG 2005

i ve serously damaged the front of my mustang 2002 GT convertible is it possible to take the opportunity to repair and exchage with a

2005 front Ass ( hood , fenders , grill, bumper) even there are modifications no body can help me in france , anybody could tell me who could give me this information before ordering new repaired parts

tks for all / jacques / FRANCE /

Reply to
jeepystar
Loading thread data ...

Well anything is possible.... however the 2005 and 2002 are different platforms so it's not a bolt on even if it can be done at all

Reply to
Brent P

No, that will not work. Those 2 model years are completely different and the parts do not interchange. Maybe the parts from a 2003-2004 would work if you cannot find 2002 parts in France.

Non, celui ne fonctionnera pas. Ces deux voitures sont trop différentes. Les morceaux de 2002-2003 ont pu fonctionner si vous ne pouvez pas trouver un 2002.

Si tout va bien, vous pouvez comprendre ceci. Le Français est ma quatrième langue.

A bientot,

Reply to
Ritz

merci beaucoup bravo pour le francais , tres peu de personnes repondent en francais je suis pret a faire des grosses modifications sur les ailes adapter les phares et la grille ne pose pas de difficult=E9 la seule chose reste d'avoir les cotes du pare choc

tks a lot greatings for your french less few persons give me response in french i'm ready to execute hard modifications on fenders interchange head lights and grill is not a big problem the most important thing is to have complete dimension or a 2005 bumper

who could give that ??=20

best regards / jacques

Reply to
jeepystar

tks for response i had in my mind it was not possible to bolt on ( the contrary would it be marvellous !!! ) the only thing i'd want to be sure is that the bumper is same width poly hood , grill and hlamps could be adapted or perhaps i could change the front metal face ( 2005 in place of 2002) to be sure that the bumper coul be bolt on ??

tks / jacques

Reply to
jeepystar

Il faut que je me demande pourquoi vous considerez 2005 et non pas

1995-2004. Les deux sont tres differents, pourquoi modifier les ailes et cetera d'une 2005 pour votre 2002? Peut-etre ces sont les seuls vous pouvez obtenir ou vous habitez? Ou peut-etre c'est trop cher en France, et il faudrait les importer. Je ne sais pas, je devine que c'est un des raisons...

Si c'est possible, je chercherais des ailes, phares et grille d'une Mustang "SN95" c'est-a-dire une des annees qui sont pareilles a la votre. Peut-etre vous avez deja dites "non"....

Pardonnez moi... mon Francais n'est pas bon, et je n'ai pas utilise des accents. C'est ma deuxieme langue ;^)

Je ne suis pas sur. Il y a beaucoup des marchands "aftermarket" qui connaissent tous les dimensions que vous cherchez.

Reply to
Wound Up

merci pour votre message je pense que je vais reparer avec des pieces 2002 j'ai envoy=E9 quelques mails a des demolisseurs mais pas de reponses croyez vous que l'on peut commander et verser de l'argent en toute confiance a ces demolisseurs ?

Tks for your message i think i'll repair with 2002 parts i've sent several mails to mustang salvage but no response do you think i can send cash money and trust this kind of company for shipping used parts ? do you know a market place for mustang used parts ? or good adresses witch make business with europe ?=20 tks / regards

Reply to
jeepystar

Pas de quoi. Je pense que ce serait meilleur, utiliser des pieces

2002. Quant =E0 envoyant de l'argent aux demolisseurs, je voudrais les pieces dans les mains quand je leur donnais de l'argent. Je n'ai pas aucune confiance sans les voir. Est-ce que vous pourriez aller voir les pieces que vous cherchez, ou est-ce que ces demolisseurs sont de trop loin de vous? J'imagine que l'affranchissement accro=EEtrais les prix fortement.

Malheureusement je ne connais pas des enterprises autos qui fait de commerce en Europe. Il se peut que mes amis ici sachent, et je leur demanderais pour vous.

A bient=F4t,

"Bless=E9 vers le Haut" Serpent de tonnerre #65

*** Voir ce page - il y a des links ici, sous "Paint, Body and Chassis"

formatting link
***

-------------------

No problem. I think it would be better to use 2002 parts. As for sending money to the wreckers, I would want the parts in hand when I gave them the money. I have no confidence without seeing the parts. Can you go see the parts you're looking for, or are they too far away? I imagine that postage would greatly increase the prices.

Unfortunately, I don't know of any auto businesses who do business in Europe. My friends here might, and I will ask them for you.

Later,

Wound Up ThunderSnake #65

*** See this page - there are links here, under "Paint, Body and Chassis"
formatting link
***

Reply to
Wound Up

Tks for your message i think i'll repair with 2002 parts i've sent several mails to mustang salvage but no response do you think i can send cash money and trust this kind of company for shipping used parts ? do you know a market place for mustang used parts ? or good adresses witch make business with europe ? tks / regards

I would not send cash for this type of transaction, use a credit card.

Reply to
351CJ

I wouldn't do business with a company that won't respond to my requests for service. Find someone else who will talk to you on the phone, and use a credit card.

Carl

Reply to
Carl

HI,

You can visit the following web site... they speak French and English.

formatting link
Bonne chance.

JF

Reply to
News group

merci pour votre message malheuresement il n'y a aucun demolisseurs de Mustangs en europe je suis oblig=E9 de commnder par les USA je doute qu'ils ne m'envoie autant de pieces sans paiement il faudrait trouver quelqu'un de confiance qui les achete et me les envoient

tks for your message unfortunatly , ther is no MUSTANG dismantlers in EUROPE i'd be obliged to order from USA , i wonder myself if they acceipt sending so mutch parts without payment i'd seek a trustly person who could buy them and re -send

Reply to
jeepystar

tks for message you're right , but i've not a lot choice there is no used mustang parts 2002 in EUROPE in france we have only 1 american car dismantler , ( and he is so little ) just 20/ 30 cars no mustang a all jacques

Reply to
jeepystar

un grand merci , je vais poster une demande ds le forum effectivement je n'avais pas pass=E9 au canada=20 super

Reply to
jeepystar

Tant pis, alors. Je suis un peu choque qu'il n'y ait pas aucun qui a des SN95 (95-04) Mustangs!

Evidemment. Bonne chance. J'espere que vous avez bonne carte de credite. A la cote d'Est il y en a beaucoup. Moins d'affranchisement?

That's too bad. I am a bit shocked there is not a single one who has SN95 Mustangs.

Apparently. Good luck, I hope you have a good credit card. On the East Coast there are many. Less for shipping?

-- Wound Up

Reply to
Wound Up

Hello,

There is a company

formatting link
that sells a 1999-2004 modification which allows your car to look very much like a 2005. I don;t know about shipping, but you might check the site.

Mike Osborn

Reply to
Mike

the french do one thing and do it very well

RETREAT

h u r c

Reply to
simpson4532

hello Mike tks a lot for your response , super interesting , as soon as i read it it check and leave a message on the site , it exactly what i was looking for , hope it will be not too expensive

best regards / and tks a lot / jacques

Reply to
jeepystar

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.