Recommend an ECU code reader for Pug 306 1998 (UK)

Can anyone recommend a suitable fault code reader for a Peugeot 306 1.4l petrol (Equinox badge), originally purchased in 1998, August I think. It's a UK model and is the new style.

It has the 'standard' OBD connector behind the internal fuse box (in the driver's footwell) - but I've yet to find any confirmation whether the car actually uses OBDII etc.

Ideally I'd like something which could give extended information (not just fault codes, but engine parameters etc), or the more detailed fault codes (letter + 4 digit), rather than just the more basic slow code flashing light ones.

However, I don't know whether this car supports any of these more advanced reporting - hence my request for a recommendation of a reader which is known to work with this model era.

Thanks

David

Reply to
David Hearn
Loading thread data ...

The UifTech U581 (£60 eBay) I've just bought is supposed to be tested as OK with the 306. I have no way of checking this out though. Was your car on sale in the U.S.A in '98? That would make it extremely likely to be OBD2 compatible. There's supposed to be an emissions sticker under the bonnet stating OBD2 or EOBD but my daughter's '02 Megane doesn't have one and it works OK with the U581. The U581 does generic and manufacturer's codes with text descriptions, no idea how extensive the coverage of OEM codes is though, and seems to be the cheapest hand OBD2 EOBD CAN scanner with live data functions and is the reason I bought it. It's also internet updateable. To do better I think you're talking £120 and upwards.

Reply to
Steve B

The issue I seem to have is that there are 2 sorts of readers for Peuegots - ones which connect onto a connector on the ECU box in the engine bay (remove 2 pin connector - insert reader connector into 1 pin, other connector to an earth) and these are the flashing light versions. However, this connector is not present on my 1998 306. The documentation for one of these readers suggests that these work with 306 models up to 1993 - but I certainly don't have the required connector.

The other connector type is an OBD connector next to the steering wheel in the fuse box - which this 1998 model 306 has. However, searching around on the internet it suggests that it was actually from 2001 that this connector was OBD compliant. Apparently, when people have tried standard OBD readers in my era of car, they've found that they don't work. Typical Peugeot way of doing things - put a standard plug on there, but don't implement the actual software interface to that standard! As yet, looking at the documentation for all the OBD readers, Peugeots are only listed from 2001. The EU required all new model petrol cars sold in the EU to implement OBD, but existing models got an extension to 2001, which might explain why 2001 is listed everywhere.

So I'm in a bit of a black hole. Older reader's won't work (wrong connector), and newer OBD readers won't work as the software interface is wrong. There doesn't seem to be an reader for the interim models.

The only possible thing I can think of is that one of the pins on the 'slightly OBD' connector exposes the same pin that the old on-ECU connector did - but unfortunately I've not yet found any information about that.

I believe my old garage which did MOTs (not a Peugeot dealer or specialist) used to include the exact RPM + temp during the emissions test. My current one (council depot) overrides this and does it manually ensuring it's up to temp etc. Does anyone know anything about these emissions testers, and how they read the temp/RPM for these machines? Because it they use OBD2, then it may give me some hope.

Thanks

D
Reply to
David Hearn

My MoT place has a gadget that plugs into the cigarette lighter to send the rpm to the emissions machine, it can also use a standard HT lead pickup if needed, oil temp is usually just interpreted as OK by visual inspection, but there is also a probe that can be put down the dip stick hole if in doubt that confirms the exact temperature of the oil to the machine.

He also has a Launch code reader that reads everything imaginable, but it was several thousand pounds worth !

Mrcheerful

Reply to
Mrcheerful

Certainly true for my '98 406 which is fitted with the OBD connector apparently wired for ISO 9141-2 but the (Bosch) ECU does not support OBD.

Chris K

Reply to
CJK

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.