Need simple how to .. 2000 GTP

Whats needed to remove, and install brake rotors. Front and rear. Mine are in need of a regrind.. I have replaced the pads, so I am semi familiar with the area in question Dave

Reply to
DMHenrie
Loading thread data ...

Fronts - Remove 5 lug nuts & front wheel. Remove 2 bolts holding Caliper, the rotor will almost fall off after caliper pulled off.

This way works on my car.

========= Harryface =========

1991 Pontiac Bonneville LE 3800 V6 ( C ), Black/Slate Grey _~_~_~282,970 miles_~_~_

~_~_~_~_U.S.A._~_~_~_~_~_

~~~The Former Fleet ~~~

89 Cavalier Z 24 convertible 78 Holiday 88 coupe 68 LeSabre convertible 73 Impala sedan
Reply to
Harry Face

Hi Dave! How hard was it to replace the pads?

Eldred

Reply to
EldredP

Jumping in here...

On some of the older GM cars (dunno about newer), I'm talking maybe

1991-1993 and other years, you had to rotate the piston cup on the rear wheel calipers to press them into their recesses. Overall, disc brakes are a complete cake-walk. Buy a Haynes or a Chilton's manual for your car (usually available from any auto parts store (Autozone, O'Reilly's, NAPA, etc.) for around 20 bucks and then the pads/shoes and get after it (reading the manual, of course). :)

--HC

Reply to
hboothe

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.