Remote Keyless

Hi, new to the group here. I have a '99 Grand AM and 2000 Grand Prix. Would like to know how to find out if they are equipped for remote keyless entry (I only got one key each and no FOBs). Also would like programming directions for these if anyone has them. Thanks, Steve '97 Bonneville SSE '99 Grand Am SE '00 Grand Prix SE Not bad for a Chrysler man!

Reply to
SSTEIN2
Loading thread data ...

To see if they have keyless entry find the RPO codes then go to a website that'll show you what the codes mean.

formatting link
How toprogram them may be in the instruction manual but I'm not positive.

Reply to
Phillip Schmid

Reply to
Matt Jajkowski

I have pasted the instruction below, is it this one I found back in Feb this year? If it is, it said to re-program new remote plus your existing remote as well!!!

Paul ______________________________________________________________-

Here is the information from the owner's manual of a 2001 Camaro. Perhaps the same procedure applies to your vehicle:

Matching Transmitter(s) to Your Vehicle

Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have only four transmitters matched to it.

Have each transmitter you intend to match ready for the next steps. To match transmitters to your vehicle, do the following:

  1. Turn the ignition key to RUN, then to OFF. This will disarm the content theft-deterrent/alarm system (option).

  1. Remove the RADIO fuse. This fuse is located in the main fuse block which is located on the left side of your instrument panel. See Fuses and Circuit Breakers in the Index.

  2. Turn the ignition key from OFF to RUN three times quickly (within five seconds). The vehicle will respond by locking the doors, unlocking the driver's door and releasing the hatch. Your transmitter is now ready to match the vehicle. Leave the ignition in RUN.

  1. Press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The vehicle will respond as in Step 3.

  2. Repeat Step 4 for the remaining transmitters.

  1. When you have finished matching all of your transmitters, replace the RADIO fuse.

  2. Check that all transmitters work by pressing the buttons.

If the transmitters don't work, or if you'd rather not match the transmitters yourself, see your dealer.

Reply to
Paul

keyless entry is $35 from

formatting link

Reply to
I'm Right

ebay $10

Reply to
slicker

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.