Rover 420 (Air con) heater/gauge problems...

1997 420 GSI Air con model, temp gauge works VERY sporadically (more often not working than is), heater takes an age to give out ANY heat. Water level ok and clean, and no warning lights on, so I'm suspecting the top hose thermostat, any other suggestions. The only thing I did of late (three months ago) was undo the top hose to replace the alternator, could I have disturbed something along the way, we've only just started to use the heater so the problems only just come to light. Thanks in advance.
Reply to
seeeker
Loading thread data ...

Could have got an airlock in it.

Reply to
Conor

Reply to
starmann

Thanks to both you guys for the response. Tried stat first and it was stuck half open hence the problems. For reference QH had the wrong stat listed for my model (1997 R 2.0 non-turbo), turns out after a lot of back and forward mine was using the 2.0 turbo stat which is top hose mounted not in a separate stat housing. Best to take your stat with you to the shop to match up rather than trust their books/part numbers.

Reply to
seeeker

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.