86 900 Transmission upgrade opinions

Hey all. My 86 900t automatic tranny is on its way out and I planning to replace it with a manual (I just hate the auto, I prefer the control of a manual). I have secured a transmission & engine from a deceased SPG (rear ended, badly. Engine was still good). Before I swap the auto out, I am going to have the manual rebuilt. I want to upgrade the clutch and other areas.

So, what do I need from you?

  1. Any recommendations on the brand of clutch and support hardware? there are so many manufacturers, I have really no clue as to who is good and who is just claiming to be good.
  2. Will a stock master/slave clutch cylinder system be OK, or would that be needed to be upgraded too? (I have a new set that was going to go into another 900 that died before installation)
  3. Besides upgrading the fly wheel, any other recommendations?

I have the OEM red box APC and an upgraded FPR (2.8 bar), and am planning to add high flow injectors, fuel rail and high flow fuel pump to complete the fuel system (maybe a rising rate FPR later), So I want a tranny that can deal with the added power from the engine.

Jeremy

Reply to
Jeremy Brown
Loading thread data ...

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.