1. Home
  2. SAAB Cars Forum
  3. Glove Box Light Repair

Glove Box Light Repair

1997 Saab 900 SE Convertible. Glove box light won't come on. All others work fine. Bulb is OK. No voltage read from wires. Anybody have a wiring schematic for this car and circuit? Has both a black and green wire going to the bulb/switch assembly. So far, it's the only thing I can find wrong on my newly acquired Saab. Great cars!
Reply to
Paul Merriman
Loading thread data ...

Try checking the glove box light with the headlight switch in each position. The current source is different with each setting of that switch.

The Green wire should be hot at all times (+12v) referenced to a good ground. The black wire is switched to ground and should measure a low resistance to ground when the glove box is open (switch released). I have schematics but they are not easy to send.

-Fred W

Reply to
Fred W.

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.