I am in the process of changing my rear tapered axles to flanged axle and have spilled some brake fluid on my pads. I would like to pick up a set of rear pads for 11" drums from a local parts store. Does anyone have a modern Part number?
My local part store old book show 11" front and 10" rears but does not show rears for a disk brake Hawk
Thanks
Allen
If I have the number it's on my web site in the interchange spreadsheet
I am guessing that you will have to source them from a vendor like Fairborn as even the other ones that I do have numbers for are hard to find except for the six front/V-8 rears.
Do you mind posting the number you got for the V-8 fronts? I think I have a number but have not been able to verify it with FLAPS.
thanks,
nate
Studebaker-r2-4-me via CarKB.com wrote:
Thanks Nate but no cigar! It's on your list but no number is in the data base cell.
N8N wrote:
Allen,
I have been using Carquest Brake Shoes in My Avanti. I got them at the local Carquest store in Belleville Ont. Their Part Number is FRI BS
53 They come is a blue and white package and are premium quality.Peter Sant KOOL R2
Studebaker-r2-4-me via CarKB.com wrote:
My parts file shows:
63 - 64 Avanti (all) Brake Shoes (Rear) 1557672 Edited Jan 2002) NAPA B-173 Bendix 173 Note: B 173 Check for 5/16 Cyl input Slot, B-53 is used on Avanti II's, is largerThank Peter. The Part Number is Good and Carquest has a set in their Toronto Store. $70.00 for the set
I am go>Allen,
B173 is correct for the Avanti's with the 3/4" rear cylinders. B53 was an old truck? number although I think works on later II's with the larger wheel cylinder.
-- wf.
SilverStude wrote:
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.