91 Legacy door panel

Want to remove the drivers door panel on 91 Legacy to try and pound out a dent in sheet metal. Any hints or tricks for easy removal of the panel?

Reply to
Jr
Loading thread data ...

Not too hard - easier with power windows. Now, how's my memory tonight...? Leave window UP. Disconnect -ve battery terminal. Lever out the door latch trim without snapping off the two clips at top & bottom. 1 or 2 screws behind little covers in armrest. 3? screws at base of speaker cover. Then go around base and 2 sides of panel and carefully pop clips free - something with a broad flat blade - don't scratch paint! Disconnect terminal blocks from window & doorlock switchgear. Gently lift whole panel up to release the snap clips at the top of the door. It will bind under the triangular fillet at the front of the window. That pulls stright out unless some wally has previously snapped off the 3 pins and glued it back on! If so - work panel around it gently. back on is a straight reverse. Remember to reconnect the cable blocks. Manual window winder - Help needed from someone else. Cheers

Reply to
hippo

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.