2000 Dodge Ram front brakes dragging:

- H
- Hal
  
  Contact options for registered users
Vote on answer
posted
16 years ago

Mon, Apr 7, 2008 12:48 AM

Master cylinder pushrod adjusted too long? If pressure remains in the system either the MC isn't retracting or a return port is blocked.

Chris

- B
- Bush
  
  Contact options for registered users
posted
16 years ago

Mon, Apr 7, 2008 1:30 AM

Hi I am trying to help a buddy with his 2000 Dodge Ram 2500 4WD series pickup which has dragging front brakes. Dragging to the extent that the pads smell when you stop. He installed new calipers and hoses, pads and rotors, new hub and bearing assemblies. With the truck on jack stands, you can bleed the brakes and the wheel spins normally, but if you pump the pedal several times and release it, you cannot spin the wheel. Any ideas?

Thanks,

Bush

- M
- Mike
  
  Contact options for registered users
Vote on answer
posted
16 years ago

Mon, Apr 7, 2008 2:50 AM

Does this occur on both front wheels or just one ? If both I would suspect a problem with the master cyl. If it is only on one side check the brake hose.