'99 Cavalier. The only axle/spindle nut sockets I can find around here are 30mm and up. 30mm feels too big. With my not-too-precise calipers, I measure 1.15". Is this maybe a 28mm? 1 3/16? Clues?
Thanks, George
28mm = 1.102", or about 1 7/64"
1.15" = 29.21mm
1 3/16" = 30.1625mmTry to get a 6-sided 30mm or 1 3/16" socket. Any impact wrench socket should be 6-sided.
28MM I believe.
1 1/8" maybe? 1.15 is 29 mm. 1 3/16" is a legit size, but I'd be surprised if that was the correct one, and it is over 30 mm. So if the 30mm socket was loose, the 1 3/16" socket would be worse.
Ed
Apparently, it's a 30mm - at least, that worked. I still think it felt loose, but who can argue with success?
George
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.