Replace lights bulbs for FAN speend, heat and AC settings panel

2000 Toyota Camry CE, If I rememebred that was always light for FAN speend, heat and AC settings panel.

How to replace those lights bulbs for FAN speend, heat and AC settings panel on the Dash?

What kind of tool do I need?

Reply to
c_shah
Loading thread data ...

What I mean, I can not see those buttons during night time, I have to turn on dome light to adjust fan speed...

Reply to
c_shah

I had the same issue with my camry of that year. To replace those bulbs you need to get the three knobs on the front of the panel off (fan speed, temperature and vent control) off. Some may come off easy others may not. Remove the three screws from the face plate, (One under each knob). Before all this, I think yo have to take the bezel off that is around the stereo and climate cluster. Take out the cigarette ash try and give a firm but gentle tug at it it. It should snap out fairly easily. I'm not sure if you have to remove it though, It has been so long since I replaced those bulbs. Good Luck

Reply to
camryguy

camryguy, Just to let you know I was able to remove those three knobs and screws, but not sure whether the entire plate needed to be taken out to replace bulb?

I could not find that bulb after I have removed those three knob.

Reply to
c_shah

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.