i,ve just fitted a new sender unit to my 74 van , can any one tell me if you can adjust the gauge neddle , as its reading to low . thanks
- posted
20 years ago
i,ve just fitted a new sender unit to my 74 van , can any one tell me if you can adjust the gauge neddle , as its reading to low . thanks
On Tue, 28 Oct 2003 15:47:27 -0000, "Bill Neal" shared the following:
Yes, add gas. :-) Just kiddin'. Maybe you could look at how the sending unit works and bend sown the rod that the floater thing is on so that it would read a higher level on the guage for a given level of gas?
-- Travis
'74 Bus, unlike earlier years *can* be adjusted. But it is like working on a watch movement. I strongly recommend living with it.
You should do this test: ground the sender wire. If the gauge goes to FULL, the vibrator and gauge are probably working correctly and the sender calibration may be off.
Speedy Jim
Hehe, yep, that's the quickest way. ;-)
Sorry, couldn't help myself.
-Rob
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.