On Tue, 16 Sep 2003 22:52:12 GMT, "Xyclone" ran around screaming and yelling:
can you use stroker pistons in an un stroker clearanced case? you should be
>able to right? and if so you can use stock rods and crank too right?
sure you *can*...but you will have hardly any compression....stroker pistons are designed to use the same cylinder as the non-stroker pistons...so to do this the wristpin height is moved up on the piston(toward the top)....if you use stock lenght rods, stock stroke, and stroker pistons you will have a HUGE deckheight... J