Just bought second hand dog guard with a bag of bits to fit it. Anyone out there know the correct brackets to use and the orientation they should be installed.
Thanks
S B
- posted
19 years ago
740 dog guard
Loading thread data ...
- Vote on answer
- posted
19 years ago
You will have to take off the top trim panel running along the roof line and cut out sections on both sides (there are markings on the on the back of the panels). Behind the panels are bolt holes for the dog guard mountings. Just plain logic is required to orientate them correctly. The plastic blocs which screw into the seat backs are a little more difficult to site. With the seats in the up position, clip the mountings onto the dog guard then mark their position on the back of the seats to site the self tapping screws, doing it this way will ensure that the guard is tight when down and not rattle about making noise.
Ken
----== Posted via Newsgroups.com - Usenet Access to over 100,000 Newsgroups ==---- Get Anonymous, Uncensored, Access to West and East Coast Server Farms!
----== Highest Retention and Completion Rates!
formatting link
==----