'89 240 DL Wheel Stud Replacement

What is the procedure to replace a front wheel stud on a 1989 240 DL?

Can you replace the stud with the front hub on the vehicle? Is there enough room behind the hub?

On other vehicles I have been able to punch the studs out while the hub is on the vehicle, and replace them using the wheel nut and some washers to pull the stud in place.

Thank you.

Louis--

********************************************* Remove the two fish in address to respond
Reply to
Louis Bybee
Loading thread data ...

Yes, there's enough room. You should use some kind of press tool, not a hammer to get the old one out.

Reply to
Mike F

Reply to
noreply

I believe I'll give it a try.

Thank you.

Louis--

********************************************* Remove the two fish in address to respond
Reply to
Louis Bybee

Yes, different stud, but the same procedure otherwise.

Reply to
Mike F

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.