Power lock-key fob programming

Greetings-My gf's '96 850 wagon was in the auto body shop recently to repair deer damage. While there, apparently the lot kid really didn't know how to drive a stick and whaled the drivers door against something hard enough that the shop replaced the door and re-painted the entire vehicle for nothing. Anyway, when I picked it up the door unlocked chimes wouldn't shut off, gas door wouldn't open, and none of the interior lights worked and the remote entry didn't unlock. They took it back grumbling about having to take it to the dealer, but called bright and early the next day and said 'come and get it'. Seems the only change was the key fob was now programmed so the car "knew who I was" Everything worked fine, with my keys. My gf's keys won't unlock [or lock] and the manual lock will not work correctly. First step is to get it to recognize the keys then work on any other issues after that. Any know how on programming remote keyless entry? Thanks in advance

Kelly

Reply to
Otherdude
Loading thread data ...

It is in the owner's manual, but in case you don't have yours, try this:

Close all doors, hood and trunk. Switch the ignition on and off, (pos II) within 10 sec, 5 times. Leave the Ignition "ON" the fifth time. Push one of the two buttons on the remote within 15 sec.. You will see the LED blinking for a moment. Program the second remote within 10 sec. after the first one. You can program max. 4 remote controls.

Reply to
Mike F

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.