No Spark

Hey all..

Well, the background. 1996 2.0 GTI 8V. Engine code ADY, Simos ECU. Well, as you can tell from the message title, poor little blighter won't start and has no spark. I've replaced the engine speed sensor, but alas no joy. There's no HT side volts, and the 12V is present at the coil and the distibutor hall sender. Ground connections are fine. Engine turns over fine, but just won't fire.

Any ideas?

Many thanks.

Reply to
The Admiral
Loading thread data ...

Check if the hall sensor is pulsing. Turn ignition on and measure signal output with dmm while turning the crank by hand/tool. It should sweep between ca. +12v and zero. Doesn't it also has a cam sensor?

SFC

"The Admiral" schreef in bericht news: snipped-for-privacy@4ax.com...

Reply to
SFC

Change the coil. It fails around that age. (got the same car, changed the coil 2 years ago when it would no start)

Reply to
Eduardo K.

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.