Latest threads in Chevrolet 4x4 Trucksshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Piston Slap
I have a 2006 Yukon Denali with the 6.0 engine with 12K miles. I recently started hearing a knocking sound when the engine is cold. Has piston slap been reported on these engines? Please tell me no...
46
|
17 years ago
|
46 | |
|
Rear axle seals keep going bad on '02 2500HD
Anyone know of known issues w/ the '02 2500HD 2WD rear axle seals? My Dad is getting ready to have a third seal replaced in 91K miles before the warranty expires. The first went around 50K miles, the...
2
|
17 years ago
|
2 | |
|
Chevy G20 Van replacment body metal
My '95 G20 Van is showing a lot of rust around the lower extremities.. years of salt up here in Maine. Has anyone tried some of these replacement pieces that are generally available? It's a work van,...
17
|
17 years ago
|
17 | |
|
No wipers
I have a 1988 S-15 Jimmy with a 2.8 Motor. Wipers will not work and have replaced wiper motor. When i turn on the wiper switch i get a Thumping noise . But my wipers dont work.
6
|
17 years ago
|
6 | |
|
96 350 oil filter housing question
I have a 96 silverado I am going to replace the oil filter housing seal in. My question is does the oil cooler lines that screw into the housing have some sort of seal in them also? Is it just a...
6
|
17 years ago
|
6 | |
|
GMC SIERRA STEERING/ALIGNMENT
I have a 2000 GMC sierra with a 6" lift kit. I hit a big pothole and had to replace the passenger front shocks and upper shock hoop. My real problem is a severe vibration between 40 and 50 mph and my...
3
|
17 years ago
|
3 | |
|
2005 chevy silverado 3500 dually
Ok so we have a 2005 chevy silverado dually 3500 duramax diesel...the engine is making an awful puttputt noise and when you hit the gas the truck will not move, it won't even rev up when you hit the...
8
|
17 years ago
|
8 | |
|
p/s 92 K1500 Pickup?
Ok, Here's my problem. I'm having an issue with the power steering being hard to steer at an idle once the truck is fully warmed up. Truck is stock with 350 engine, I've replaced the OEM P/s pump with...
19
|
17 years ago
|
19 | |
|
Air Bag Light, 97 GMC
How do you reset the "Check Air Bag" dash light? Vehicle is a 97 GMC Jimmy, 4wd, 192K. All connections from the front impact sensors to the steering wheel have been checked and there does not appear...
6
|
17 years ago
|
6 | |
|
1998 Suburban K1500 4wd problem
Hello there, I am a new owner of a beautiful 1998 Suburban, have a problem and need help - as there aren't any Chevy dealers here in Slovakia :D The car runs without any Problems as long as in 2wd...
9
|
17 years ago
|
9 | |
|
1987 tbi motor without roller cam
will this be the same as a 1990 roller tbi.... yes minus the roller part.. lol.. I am going to use a computer from a 1990 350 ACSU 1227747 on the rebuilt 1987 tbi motor but I was sure the newer tbi...
—
|
17 years ago
|
— | |
|
96 Silverado oil filter housing question
have a 96 chevy truck Silverado with a 350. It has an oil cooler. I have a leak somewhere and was going to replace the seal in the oil filter housing. I have never taken one apart and my Hayes manual...
—
|
17 years ago
|
— | |
|
how do you check the fuel psi on tbi motor
Even thought the tank and pump are new.. I wanna make sure the engine is getting the propper flow.. Is there a gauge I can put in between the rubber coming off the tank ?... thanx
6
|
17 years ago
|
6 | |
|
tbi 350 engine running weird
Put a tbi 350 with wiring in my 81 chev truck rolls over a lot before starting, then runs weird as in idles weird then, does like a surge up and down from 600rpm to 800 and so on then seems to run...
6
|
17 years ago
|
6 | |
|
Engine lupes for the first 10 seconds after starting it
I have a 93 chevy silverado that I have had the fuel pump replaced ever since then the engine lupes for the first 10 seconds after starting it. Then it goes back to normal.. Does anyone have any...
7
|
17 years ago
|
7 |