Uncompromising 1st M RS BMW with 521 HP by TUNINGWERK
The fact that the TUNINGWERK company specializes in BMW models, has
geographical grounds, as Puchheim is a catchment area of Munich and
probably rather the other way round. The BMW head office is situated
in Munich. On the other hand, the question was only in time for the
well-acknowledged BMW models that the 1st BMW M-Version would appear.
TUNINGSWERK has given it no other name than the 1st M RS.
The motor, also referred to as engine, was completely modified. The
transmission of the back axis was shortened up to 3.25 transmission
ratios, optionally 3.45 are also possible. As a differential locking
it has a suitable for the power to weight ratio Drexler lock. The
cooling system was completely modified, including the second oil
cooler. The model has a titanic exhaust system. The engine clutch has
unconditionally optimized stability, it is well suited for the city
traffic, and herewith a racing clutch is possible. But for eventually
planned racing some further small modifications for the FIA admission
are needed, such as the expansion of the case. There is still much
potential in further weight reduction, while the door trims and
insulation material is in the original state. GT4 front lip, engine
hood, boot lid and also rear spoiler and Recaro seats called
PolePosition are made of carbon. It is possible to install doors out
of the same material and plastic side glass, however with the full
case. The 3-x club sport lorry running gear can be combined with
H&R lightweight stabilizers upon request.
The important connection between the vehicle and the road in this case
is provided by the forged ATS superlight 9x19 inches rims on the front
and 10x19 inches rims – on the back. Additionally, the vehicle is
equipped with 245/35R19 Dunlop blow-up „Sport Maxx" tyres on the
front axis and 285/30R19 ones – on the rear axis. As an alternative,
there are also FlowForming Crosslight ATS rims of the same size. The
car has installed steel breaking system with discs 370 mm in diameter
by Mov'it to take care of the perfect stop, where the 380 carbon
ceramic discs are also possible.
Due to this balanced mix of tuning means, the TUNINGWERK succeeded in
creating the driving dynamics of an outstanding quality. The six
three-liter cylinders with 521 hp or 388 kW enable 614 Nm maximal
torque from 2,800 rpm and maximal speed of 300 km/h (depending on the
type of tyres!) This 1st M RS BMW by TUNINGWERK is undoubtedly a
perfect compromise between the street and the race track.
The car tuning costs including vehicle: 119.000 Euro!
View the attachments for this post at: