Latest threads in General Ford Forumshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Escape Hybrid vs Hyundai Sante Fe
Looking to see if anyone here can provide objective opinions/ideas on why I should get the '08 Escape Hybrid 4WD vs the '08 Hyundai Santa Fe Limited AWD? Just so you know, I've read the annual auto...
14
|
16 years ago
|
14 | |
|
Thanks Jim Warman & Don Byrer
Hi AAF group, I recently asked a question regarding a PO401 error code. Thanks Jim & Don - it seems that your diagnosis was correct - DPFE sensor - in stock part at the local NAPA store. Thank both of...
2
|
16 years ago
|
2 | |
|
the best way for Ford to rebound.... ?
make another 1990's type of taurus, thats it. that was a sharp car an sold a line is develop a car that appeals to the masses an they will buy, to me ford has alotta pinto's an vegas,nothing that is a...
23
|
16 years ago
|
23 | |
|
Ford Ramps Up Investment in Vietnam
In the drive to make the Blue Oval brand ubiquitous on Vietnam roads, the automaker announces a $10 million investment in its Haiduong assembly plant. Read More: NewsHub: Latest auto news sourced from...
1
|
16 years ago
|
1 | |
|
95 Ford F150
My ex-wife has a 1995 f150 that has a gas pedal that sticks. I told her to drive in and get the cable replaced but she looked at it and thinks that she can change it. My question is... is this...
2
|
16 years ago
|
2 | |
|
1990 Ford 5.0 diagnostic help...please?
I don't know if I'm trying to make a better sow's ear or not. I have a 1990 Mercury Colony Park wagon. Obviously it's not new but it's not a beater either. Even with over 100,000 mi on it, the 302/5.0...
7
|
16 years ago
|
7 | |
|
Oil pan gasket replacement 89 Merc Marquis
What is involved in changing the oil pan gasket on an 89 Mercury? A friend took his Merc to a garage to have the oil pan gasket replaced, and was quoted 5 hours labor, partially due to the removal of...
1
|
16 years ago
|
1 | |
|
300 I-6 valve cover bolts
today's project was to a) tighten up all the valve and lifter cover bolts on the Ugly Truck to try to keep it from marking its territory so much and b) try to determine once and for all whether or not...
3
|
16 years ago
|
3 | |
|
94 T-Bird 4.6 Noise.
It`s a sweaking sound as the motor is running. Maybe a belt tinioner ? It seems to be getting loader. Anyone have any ideas on what it is and how much to fix ? 112,000 miles on it. Ford Fan Tom
2
|
16 years ago
|
2 | |
|
OBDII Scantool
Anyone have a preference to a OBD Scantool they are or have in the past used? I am looking at two models, Actron CP9180/CP9190 or AutoEnginuity and am interested in any field use info. Other...
1
|
16 years ago
|
1 | |
|
Ohh...What a Pleasant Surprise!
Old school car fans video for viewing pleasure.
7
|
16 years ago
|
7 | |
|
2008 New 'Mondeo' Diesel engine - re-fuelling problems
3 weeks old and only filled up the fuel tank 3 times... but it takes about 25 - 30 minutes to put between 50 and 60 litres of diesel into the tank as the fuel nozzle continually cuts out every 2...
2
|
16 years ago
|
2 | |
|
250 engine runs terribly
I had my head professionally machined at the auto machine shop. The valves and springs were removed, inspected, and cleaned. The seats were reground. The head looked brand new. I installed the head,...
8
|
16 years ago
|
8 | |
|
3 speed auto to 3 speed OD
I have an E-350 chassis on a motorhome. It is a 1986 model with a 460 and 3 speed automatic. As you can imagine, the mileage really sucks. Would an overdrive transmission from a newer model be a...
4
|
16 years ago
|
4 | |
|
Ranger 2.8
As my poor rusty puppy truck approaches 300K I am, preparing for a rebuild. Like to remove all smog, remove/replace nigtmare 2150 carb, remove/ replace distibhuter with mech advanced, and redo heads...
15
|
16 years ago
|
15 |