Best Rated threads in Ford Trucksshow all threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
ford ranger rough idle p0301 and p0171
It got very cold (below freezing) a few days ago (texas). The next day, quit suddenly, the idle became very rough - but no stalling. The next day the check engine light comes on (it was about time,...
10
|
18 years ago
|
10 | |
|
|
Unlock all doors in 2003 expedition
Hello all. I had a 2001 expedition and when I would open the drivers door ALL the doors would unlock. How do I enable this because on my 2003 it doesnt work. Please help, the kids are going nuts...
9
|
18 years ago
|
9 | |
|
|
Cause of blow by in 92 F-150
I noticed today that I am still suffering from blow by on my 92 F-150 (5.0). I replaced the pcv valve back in October, but I have still accumulated some foamed up oil in my air filter housing. What...
6
|
20 years ago
|
6 | |
|
|
E4OD problem: TCIL light flashing, codes P0755 and P1728
Recently, the E4OD transmission in my 23' Maverick Class C Motorhome began acting up. Basically, it seems to work fine when first driven cold, and still works correctly on the highway, but the shift...
2
|
20 years ago
|
2 | |
|
|
Ford 302 Carb or TBI? What's your opinion?
Hey all, I have a 1961 Ford F100 that has a 302 bored .030 over. I got the engine from a guy that parted out his old Mustang after it had been rear ended so bad that the rear bumper ended up in the...
5
|
20 years ago
|
5 | |
|
|
Re: ford casting numbers
Should be a 71. Sound about right? D=70's decade. 1 = year. 1971... MK
15
|
20 years ago
|
15 | |
|
|
C6 Transmission Shudder
Hi Y'all, ... I just bought a nice '76 F-250 w/a 460 & a C6 automatic transmission. When I drove the truck for the demo drive, it ran out great. A few days later, after a long drive home (1,200 mi) it...
7
|
20 years ago
|
7 | |
|
|
Ranger Door Hinge Fix (1993 Xtended Cab). Need Help! (2023 Update)
In reference to a 1993 Ford Ranger, the door hinges are worn out and the doors sag. It appears as if the hinges are rivetted onto the frame of the truck. I wanted to go to the junk yard and pull some...
6
|
20 years ago
|
6 | |
|
|
Explorer rear end -- pinion gear replacement??
I have a 2004 Explorer, V6, auto, 70,000 miles. A few months ago I noticed a slight whine coming from the differential. It is intermittent and seems to come and go depending on the road surface. On a...
16
|
16 years ago
|
16 | |
|
|
2002 Ford explorer sport wipers problem
In article <>, wrote: Dude, switch off the invisible font.
327
|
9 years ago
|
327 | |
|
|
Disengaging 4wd in '94 F150
Bought the F150 used a number of years ago. At 30,000 miles (b4 extended warranty expired) the dealer did a bunch of work on the 4wd - not sure what all was done. Anyway, it's been working fine but to...
18
|
20 years ago
|
18 | |
|
|
Valve cover gaskets '90 F150 302. Suggestions?
Whats the procedure for changing the badly leaking valve cover gaskets on my 1990 F-150 5.0l? I am fairly good with a wrench but I have never tackled the 5L with the air plenum. Whats the estimated...
11
|
20 years ago
|
11 | |
|
|
1990 F150 4.9L EFI to carb conversion
I'm looking to convert a 1990 F150 4.9L inline-6 from EFI to carb. Will a mid-80s carb intake manifold bolt up? Best regards, Rick C. Hodgin
1
|
8 years ago
|
1 | |
|
|
New E250 vibration
I've taken delivery of my 3rd E250 cargo van. It has a strong vibration starting at about 35/40 mph and continues on till at least 70 mph. Strongest at 50/55 mph. My 2000 had the same problem and the...
7
|
16 years ago
|
7 | |
|
|
351w coolant temp sensor housing
Ford guys, please help me. I have a full size 1988 bronco xlt, I removed the stock 302 and had a 351w built. The block used is a 1984-1985 according to Ford. The problem I am having is the coolant...
6
|
17 years ago
|
6 | |
|
|
1990 Ranger AC Service Ports
Would someone please tell me the location of the AC service ports on a 1990 Ford Ranger? Also which is the high and which is the low port? I believe I found one high and to the right (looking toward...
4
|
17 years ago
|
4 | |
|
|
4R70W Whining / Turbine sound
The transmission on my 2000 f150 4.2 seems to have a heavy whining or turbine sound when I'm on the gas and the rpms are up a bit - hot or cold. When lightly and quietly cruising around 35 mph then...
8
|
20 years ago
|
8 | |
|
|
What does the "GEM" module do? (2001 Ford Explorer)
A relative of mine had a problem with their 2001 Ford Explorer that was traced to something called the "GEM" module. Some web-searching indicates that GEM stands for "Generic" or "General" Electronic...
5
|
13 years ago
|
5 | |
|
|
Expedition Power Drivers seat Locked up
I have a 2003 Expedition with Power Drivers seat. The seat has locked up and will not move in or out. Fortunately I drive this truck 99% of the time and I use it in the outer most position but my wife...
5
|
17 years ago
|
5 | |
|
|
Bleeding 90 Ranger Rear Brakes?
I was bleeding the brakes on my 90 Ford Ranger yesterday. The front brakes were easy. When I started on the rear brakes the nipple at the 12 oclock position was much smaller. I was afraid of loosening...
6
|
17 years ago
|
6 |